Roofing Talk - Professional Roofing Contractors Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
46 Posts
I would think that if the high winds are causing the insulation to blow out of the flutes before you can cover it with densdeck them it is most likely to windy to safely install any type of roofing system.
I will never forget almost getting thrown over a 16 story new construction building about 20 years ago when a sudden gust of wind grabbed a sheet of densdeck that I was about to put into place.
 

·
Registered
Joined
·
26 Posts
The ribs get the bat stuffed in them prior to any insulation,fire board or cover boards are placed over it.
It doesn't take a lot of wind if the buildings open with all those holes in the deck.
You just have to stay on top of it and cover as you go if its blowing out.
Lumber may help to if its available or possibly putting a bit of bonding adhesive here and there careful not to let it drip inside.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top