Roofing Talk - Professional Roofing Contractors Forum banner

epdm

  1. Residential Roofing
    I'm a general contractor in Tennessee. Yesterday my roofing sub decided to work altho forecast was for storms. He laid 60 mil epdm over 1 inch ISO (fully adhered...) on a flat roof section about 10 minutes before a torrential downpour. the epdm is very wrinkled and the seam is compromised...
  2. RoofingTalk.com Help and Suggestions
    Any suggestions? I have a new roof with a 1 in 60 fall into an internal gutter with a small parapet edging. 18mm OSB3 sits on top of the fairings the I've got a vapour barrier then 100mm celotex on top of that I have 6mm ply (yet to get) then EPDM. My question is what grade ply do I need ie...
  3. Commercial Roofing
    To start off I am not a commercial flat installer by any stretch of the imagination but I do like to educate myself as much as possible in all aspects of roofing. So with that said: I keep getting mixed answers on being able to install EPDM system in weather below 40% and rising. Is it possible...
  4. Residential Roofing
    Hey everyone,I'm a GC and I don't do much roofing, mainly because I'm not comfortable with all of the techniques yet. I wanted to get opinions from some more experienced professionals in the roofing field. I am doing a roofing project on my own house, so I'm working through it in my free time...
  5. Residential Roofing
    We just had a new EPDM roof installed on a 220 sq flat roof. It is not quite done and the customer is paying 10k for this roof and an Aztek railing. I noticed yesterday that under the New EPDM there are several areas that have debris under the EPDM on top of the ISO Board. They didn't clean it...
  6. Commercial Roofing
    Greetings! i am an arborist by trade, and need the insight of someone who has seen a lot of old epdm liner. i am interested in using some reclaimed epdm a recycler has, but the material is days away and i can't check out it's condition before i buy it. is being sold in 2,0000 sq ft palletized...
  7. Commercial Roofing
    Morning, Can I use used EPDM from a teaf-off as a liner for a duck pond?
  8. Commercial Roofing
    Started a re-enforced EPDM roof today and opened the first three rolls ,laid them out, let them relax for an hour but could not get them to lay flat. There are wrinkles in the seaming area and in the middle of the sheet, any one ever experience this? I am afraid we are going to have difficulty...
  9. Commercial Roofing
    We are going to be doing a repair job on a roof that currently has an EPDM membrane that we are having trouble identifying. I have attached a photo of the front and back of the membrane and am hoping that someone may be able to tell me what brand of membrane it is. Thank you for your help...
Top